120V LumenTask LED Undercabinet

With the rising costs of energy, both home  and business owners are looking for ways to not only  cut down on their energy expenses, but also to utilize more earth  friendly light sources.  GM Lighting’s LumenTask™ LED undercabinet  fixtures achieves both of these concerns while offering an attractive and low maintenance product, and now available as a  dimmable fixture.

  • 120V Direct Wiring, With integral on/off switch
  • Integral LED Power Supply
  • No Remote Power Supply Required
  • Low Wattage Consumption
  • No Harmful UV Rays
  • 3000K Warm White  90+ CRI
  • Use Standard Triac Dimmer,  Dimming to 10%.
  • ETL and Energy Star

Note: 4 fixtures Maximum load in a consecutive run,  when wiring from fixture to fixture with EZ connectors.  Recommend no more than 4 fixtures on a single hot lead leg(daisy chain/thru wiring).  For more than four fixtures on a given switched circuit, split the hot leg into more than one lead to avoid inter fixture interference.

 

Category:
  • LumenTask SPEC SHEET
  • INSTALLATION INSTRUCTIONS

Description

Ordering Information

Catalog No. Diodes Watts/Fixture Lumens  Length Finish
UCLED-8-WH-DIM-30 LED 6.4W 392 8″  White
UCLED-8-BZ-DIM-30 LED 6.4W 392 8″  Bronze
UCLED-16-WH-DIM-30 LED 11.2W 700 16″  White
UCLED-16-BZ-DIM-30 LED 11.2W 700 16″  Bronze
UCLED-24-WH-DIM-30 LED 17.2W 1131 24″  White
UCLED-24-BZ-DIM-30 LED 17.2W 1131 24″  Bronze
UCLED-32-WH-DIM-30 LED 23.3W 1347 32″  White
UCLED-32-BZ-DIM-30 LED 23.3W 1347 32″  Bronze

Accessories

Catalog No. Description
EZ-1 Connects two LumenTask fixtures directly together
EZ-3 3″ Flexible LumenTask Fixture to Fixture Connector
EZ-6 6″ Flexible LumenTask Fixture to Fixture Connector
EZ-12 12″ Flexible LumenTask Fixture to Fixture Connector
JB-1 LumenTask Junction Box for Hardwire Installation
CP-6 72″ Cord and Plug with Modular Connector